HHO Copper Pipe Musical Instrument Welding Machine

Product Details

hho copper pipe musical instrument welding machine

SPECIFICATION

Mode

Specification

GTHO-1500

Input Voltage

380  ±10%,50/60Hz,three phases

Rated Capacity (KVA)

6

Working Gas Pressure (Mpa)

≤0.2

Relative Humidity (%)

90

Rated Gas Production (L/h)

1500 ±10%

Water Consumption (L/h)

1.1

Maximum Cutting Thickness (mm)

50

Effective Punching Thickness (mm)

15

Water Feed

auto

Cooling Mode

Air Cool

The Insulation Level

F

Power Supply Protection Grade

IP21S

Flame Temperature (℃)

Adjustable 800~3200

Working Medium

Filtered water or deionized water or soft water

Working Method

Continuous

Enviroment Temperature (℃)

0~40

Outline Dimensions - L*W*H (mm)

965*620*1000

Gross Weight (kg)

145

Ventilation Space Requirement (mm)

400 in each direction


The welding of transformer wiring terminals, motor enamelled wire, and lead-acid battery plate in electronic industry


The welding technique plays an important role in magnetic wire and storage battery products which requires a high precise requirement. The welding performance has a direct impact on product quality and liability, product service life, production cost and efficiency, and market reaction speed, etc. Now the welding of the enamelled wire and other magnetic wire most adopts soft soldering which has defects of rosin joint, sealing off, loose spot and easy peel off with heating. Some others also adopt electric processing to weld the enamelled wire,but a lots of inconvenience exists when

welding multistrand by this method. Therefore, other flame welding methods like oxygen plus acetylene and propane, have been replaced by many other companies. Although oxygen-acetylene and other flame welding method also has advantages like quick welding speed, simple operation etc., a lot of other defects are also inevitable, nowadays the oxy-hydrogen has been adopted by more and more companies to replace those traditional fuels.


The oxy-hydrogen generator is also can be used to the various flame processing sites, such as the welding of metal wires, IC encapsulation, thermoelectric couple wire, LED wafer integration, hinge of the glasses metal frames, fine components cutting and fusing, sand hole fusion repair of tooth model, small casting, quenching and softening of small accessories, and so on.




Feedback