Dedicated to Oxy-hydrogen Kit Machine

Chat Now
Product Details

Dedicated to Oxy-hydrogen Kit machine

SPECIFICATION

Mode

Specification

GTHO-2500

Input Voltage

380 ±10%,50/60Hz,three phases

Rated Capacity (KVA)

9

Working Gas Pressure (Mpa)

≤0.2

Relative Humidity (%)

90

Rated Gas Production (L/h)

2500 ±10%

Water Consumption (L/h)

1.6

Maximum Cutting Thickness (mm)

80

Effective Punching Thickness (mm)

40

Water Feed

auto

Cooling Mode

Air Cool

The Insulation Level

F

Power Supply Protection Grade

IP21S

Flame Temperature (℃)

Adjustable 800~3200

Working Medium

Filtered water or deionized water or soft water

Working Method

Continuous

Enviroment Temperature (℃)

0~40

Outline Dimensions - L*W*H (mm)

1200*750*1155 1300*850*1350

Gross Weight (kg)

245 280

Ventilation Space Requirement (mm)

400 in each direction


The hydrogen generator consists of electrolysis cells, pure water tanks, hydrogen/water separators, collectors, dryers, sensors, pressure regulators, and switching power supplies. Only pure water can produce hydrogen. After the electricity is turned on, the cathode of the electrolytic cell produces hydrogen, the anode produces oxygen, and the hydrogen enters the hydrogen/water separator. Oxygen is released into the atmosphere. A hydrogen/water separator separates hydrogen from water. After the hydrogen enters into the desiccator and is dehumidified, it is adjusted to the rated pressure (adjustable from 0.02 to 0.45 MPa) through the pressure-regulating valve and regulating valve and output from the outlet. The pressure of hydrogen production in the electrolysis cell is controlled by the sensor at about 0.45 Mpa. When the pressure reaches the set value, the power supply to the electrolysis cell is cut off; when the pressure drops below the set value, the power supply resumes power supply.


Feedback