Safest fuel saver for combustion furnace
380 ±10%,50/60Hz,three phases
Rated Capacity (KVA)
Working Gas Pressure (Mpa)
Relative Humidity (%)
Rated Gas Production (L/h)
Water Consumption (L/h)
The Insulation Level
Power Supply Protection Grade
Flame Temperature (℃)
Filtered water or deionized water or soft water
Enviroment Temperature (℃)
Outline Dimensions - L*W*H (mm)
Gross Weight (kg)
Ventilation Space Requirement (mm)
400 in each direction
Commonly known as burners, there are many types of specifications, including fuel, gas (gas), and coal (pulverized coal/water slurry) categories. The application area is very wide, and burners are needed in industrial fields where it is necessary to burn fuel to heat materials or react. Combustion engines, also known as integrated burners, are based on fuel and gas. Generally used in small and medium-sized fuel boilers, fuel heaters, baking (baking) boxes and small fuel heating furnaces.
Industrial burners (burner) can increase the function of the burner after configuration, but the burner can not meet the fuel combustion heating or reaction requirements in many industrial applications. The difference between the two see the term "burner." The
In a broad sense, civilian cooking appliances, lighters, torches, and fuel injection devices in engines all belong to the category of civilian burners and special burners.
Burner: A component of a flame atomizer premixed configuration, also known as a burner head. It is the nozzle of mixed gas and transporting hull-like specimens during flame combustion, mostly single-slit type. The former is used for nitrous oxide-acetylene flame and the latter is used for air-acetylene flame. Generally made of stainless steel, but also made of aluminum or brass. There are two kinds of single-slot and three-slot types. The atomic fluorescence method uses a Meker burner, which is a torch-shaped flame. There are two types of water cooling and air cooling. Always use distilled water after use to prevent rust and crevices.
Hydrogen combustion engine has obvious advantages:
1. Fuel saving: it can save 10~30% fuel consumption;
2. Clean and Effcient: no pollution, emission 50~80% reduction;
3. Safety air adding, simple equipment transformation, and low cost.