Fuel Saver for Boiler Combustion Supporting Machine
fuel saver for boiler Combustion Supporting Machine
380 ±10%,50/60Hz,three phases
Rated Capacity (KVA)
Working Gas Pressure (Mpa)
Relative Humidity (%)
Rated Gas Production (L/h)
Water Consumption (L/h)
The Insulation Level
Power Supply Protection Grade
Flame Temperature (℃)
Filtered water or deionized water or soft water
Enviroment Temperature (℃)
Outline Dimensions - L*W*H (mm)
Gross Weight (kg)
Ventilation Space Requirement (mm)
400 in each direction
The boiler is an energy conversion device. The energy input to the boiler is in the form of chemical energy in the fuel, electrical energy, heat energy of high-temperature flue gas, etc., and after boiler conversion, steam, high-temperature water or organic heat carrier with a certain thermal energy is output to the outside. . Mostly used in thermal power plants, ships, locomotives and industrial and mining enterprises.
The main working principle of the boiler is a thermal device that uses the heat energy released after the combustion of the fuel or the residual heat in the industrial production to transfer the water in the container so that the water reaches a desired temperature or a certain pressure steam. The boiler is performed at the same time in both the "pot" and the "furnace". After the water enters the boiler, the heat received by the boiler's heating surface in the steam water system transfers heat to the water, which causes the water to be heated to a certain temperature and pressure to generate hot water or generate steam. application. In the combustion equipment part, the combustion of fuel continuously releases heat, and the high-temperature flue gas generated by combustion is transmitted through the heat, transferring the heat to the heating surface of the boiler, and the temperature itself gradually decreases, and finally is discharged by the chimney.
HHO Combustion Supporting Machine features:
Advantages: 1. Fuel saving: it can save 10~30% fuel consumption; 2. Clean and Effcient: no pollution, emission 50~80% reduction; 3. Safety air adding, simple equipment transformation, and low cost.