Brown Gas Carbon Steel Cutting Machine

Product Details

Brown gas carbon steel cutting machine

SPECIFICATION

Mode

Specification

GTHO-300

Input Voltage

110/220v ±10%,50/60Hz, Single phase

Rated Capacity (KVA)

1.95

Working Gas Pressure (Mpa)

≤0.09

Relative Humidity (%)

90

Rated Gas Production (L/h)

300 ±10%

Water Consumption (L/h)

0.16

Water Feed

auto

Cooling Mode

Air Cool

The Insulation Level

F

Power Supply Protection Grade

IP21S

Flame Temperature (℃)

Adjustable 800~3200

Working Medium

Filtered water or deionized water or soft water

Working Method

Continuous

Enviroment Temperature (℃)

0~40

Outline Dimensions - L*W*H (mm)

628*477*685

Gross Weight (kg)

72

Ventilation Space Requirement (mm)

400 in each direction



Crown Extension Hydrogen Oxygen Removal Machine Effect:

(A) equipment function:

1. Eradicate the carbon deposition on the top of the chamber of the incinerator

2. Eliminating carbon deposition from oxygen sensors

3, eradicate the three-way catalyst carbon deposition

 

(B) Equipment Effects:

1, extended initiator overhaul moment

2. Extended oxygen sensor life span

3. Extend the life of three-way catalytic converters

4, progress power 15-35%

5, save fuel 5-20%

6, reduce exhaust gas emissions 72%2. Regularly check the looseness or leakage of the pipe joints inside the machine.


Method: Simply turn off the gas valve of the gas equipment or directly block the outlet pressure gauge of the rear panel to the overpressure setting value, which is generally (0.19Mpa), and whether it will fall after 5 minutes. If yes, then the machine has a leak; if not, the machine is in good condition and leaks must be re-tightened.

3, often use dry compressed air to clean the power supply and the whole machine.

4. Regularly check the on-off state of the electromagnetic valve in the machine, that is, whether the water-adding electromagnetic valve has normal magnetic attraction when the water indicator is on.


Feedback