Car Care Products Fuel Nozzle Cleaning

Product Details

Car Care Products Fuel nozzle cleaning

HHO Car carbon cleaning machine

SPECIFICATION

Mode

Specification

GT-CCM-W

Input Voltage

220/380V ±10%,50/60Hz,    three phases

Rated Capacity (KVA)

6

Working Gas Pressure (Mpa)

≤0.2

Relative Humidity (%)

90

Rated Gas Production  (L/h)

1500 ±10%

Water Consumption (L/h)

1.1

Carbon cleaning for diesel car and gasoline car

 (1.0-7.0    liters),Time Set:20-40mins

Water Feed

auto

Cooling Mode

Air Cool

The Insulation Level

F

Power Supply  Protection Grade

IP21S

Working Medium

Filtered water or deionized water or soft water

Working Method

Continuous

Enviroment Temperature (℃)

0~40

Outline Dimensions -L*W*H (mm)

945*640*1110

Gross Weight (kg)

156

Input Voltage

220/380V ±10%,50/60Hz,    three phases

Rated Capacity (KVA)

6

Working Gas Pressure  (Mpa)

≤0.2


Gas production principle

Hydrogen and oxygen carbon remover uses water as raw material, power is used to decompose water into hydrogen and oxygen, hydrogen is used as raw material, oxygen is used as combustion aid, and is sent into the automobile engine through the air inlet, and mixed with gasoline and air for combustion. Hydrogen-oxygen gas mixture is equivalent to gasoline-supported catalyst.


Carbon removal principle

The hydrogen and carbon removal machine extracts hydrogen and oxygen atoms in the water through electrolysis, forms a mixed flow of hydrogen and oxygen, and enters the engine combustion chamber through the engine intake manifold. After the Brown gas is filled in the engine combustion chamber, it ignites and ignites, applying the principle of hydrogen and oxygen catalysis. (In the high-temperature combustion process can produce O, H and OH and other active atoms, on the one hand can promote the high-temperature pyrolysis of medium and long hydrocarbon chain in gasoline, so that the oxidation reaction speeds up), the principle of oxygen-enriched combustion (gasoline wax and Impurities such as colloids are also composed of long hydrocarbon chains or long hydrocarbon chains, and active atoms such as O, H, and OH can also accelerate their cracking, and eventually remove carbon deposits. Principles of water hydrogen circulation, etc. Carbon deposits are thoroughly and completely removed to restore the power of the car. It will not cause any damage to the engine and avoid the deficiency of traditional chemical carbon removal agents. It is a qualitative leap in the field of automobile maintenance.


Catalytic principle

Gasoline is a hydrocarbon chain with heavy molecular chains and many carbon and hydrogen bonds. The intermediate product produced by the combustion process is CO. According to theoretical analysis and experimental detection, CO is in pure air, even at a temperature of 700 degrees Celsius. Burning is also incomplete. However, after the introduction of hydrogen and oxygen radicals, as well as hydrogen and oxygen radicals, combustion has accelerated significantly. At the same time, as the hydrogen flame temperature reaches 2800 degrees, any non-flammable carbides will be gradually burned.


Feedback